Skip to content
N-1 · In buildN-1 build book

Rockets

Every rocket, real ones first.

Real rockets with their plans and numbers, then the concepts after them, clearly labelled.

N-1 · In buildW-1 · PlanningBase kit · PlanningN-1 TVC · In designN-2 to N-4 · Concept

Rockets

Built, or being built.

Each rocket has its own overview, build book and files. The numbers come straight from its design files.

In development

Modules for the rockets.

Not rockets of their own: parts that fit a rocket, designed and tested on the ground first.

N-1 TVC

In designModule in developmentN-1 TVC, rendered from the design files

Thrust vector control for N-1, vertical hold only

Gimbal travel
5 deg
Motor
29 mm
Fits tube
54 mm inside
Added mass
114 gest.
Stability
1.37 calest.
Servo torque needed
0.44 kgf cmest.

From the design files. EST. means worked out before building, not measured.

Base station

What they fly from.

The pad, controller, pad lights, ground station table and Mission Control: everything that stays on the ground. Designed the same way: one design file, real cut files, renders from them.

Mission Control

The laptop app at the base station

It talks to N-1 by radio through the ground station: live altitude, ping, locate and a log of every flight.

Concept

What could come after N-1.

Concept

N-2 · High-power rocket

Bigger motors, our own flight computer and live telemetry.

Concept

N-3 · Sounding rocket

Our own engine, tested on the ground first, aiming past 100 km.

Concept

N-4 · Orbital vehicle

Reusable, black and steel, built to land and fly again.

Concepts only. None of these is designed or being built yet. Each one starts only when the one before it is flying reliably.