Skip to content
N-1 · In buildN-1 build book

Journal

Every step, written down.

NOVTAR logs everything, the work as well as the flights. This is the running record of what was built and decided, newest first.

12 entries

Log

What happened, in order.

Taken from the project's own dated notes each time the site is published, so it stays current.

1 entries

  1. N-1

    Mission Control you can try here

    Mission Control now runs on this website as well as on our Windows launch laptop. Open it and fly a simulated N-1 in 3D, from the rail to the parachute. On flight day it will show the real thing. Not yet used with real hardware. N-1 overview

11 entries

  1. W-1

    W-1 concept renders

    Eight AI concept pictures of W-1: the rocket in the studio and on its launcher, lift-off on a jet of water, a look inside, every part laid out, the laser-cut fin can, the payload core and the launch control panel. They are concept art, close but not exact; the build book and drawings have the real sizes. W-1 overview

  2. Company

    A section for every rocket

    The website now gives each rocket its own section and pages, alongside pages for the flight computer, Mission Control, safety and the brand.

  3. W-1

    W-1, our water rocket

    A second rocket that burns nothing: a fizzy-drink bottle pushed by water and air pressure. It lets the flight computer fly and prove itself before N-1 flies on a real motor. W-1 overview

  4. N-1

    Flight computer launch-ready on paper

    Firmware fixes for long waits on the pad, bad sensor readings and landing in awkward places, plus battery voltage, bench tests in Mission Control and flight reports. None of it has flown or been tested on real boards yet. N-1 overview

  5. N-1

    Launch kit, flight card and OpenRocket file

    Everything for launch day in one place: questions for the club, a packing list, the pad sequence and recovery. A printable flight card and an OpenRocket file of the whole rocket for checking stability with a real motor. N-1 overview

  6. N-1

    Laser files ready, test card first

    Every N-1 part is drawn for the laser. Before cutting real parts we cut a test card to measure the laser's kerf, slot fit and smallest engraving, and a material test to find the right power and speed. N-1 overview

  7. N-1

    NOVTAR Mission Control

    Our laptop app for flight day: live altitude, speed and g, a phase ladder, a GO / NO-GO checklist and a library of saved flights. Tested so far in simulation. N-1 overview

  8. N-1

    A nose cone we make ourselves

    The nose cone is now laser-cut: a tangent ogive sliced into 68 layers of 3 mm plywood, stacked, sanded and filled. N-1 overview

  9. N-1

    N-1 design rev A

    Our first rocket: 800 mm long, 57 mm across, plywood fins through the wall, a 29 mm certified motor and our own ESP32 flight computer that logs every flight and radios it to the ground. Stability and parachute size are worked out from one design file. N-1 overview

  10. Company

    Model rockets and our own flight computer first

    Before anything bigger, NOVTAR starts small: model rockets flown at club launches, and a flight computer we design and program ourselves.

  11. Company

    NOVTAR is named

    NOVTAR, from nova and star. The mark is the Λ, the A from the name without its crossbar, in black and white with an ignition-orange accent.