N-1 3D model
N-1, part by part, as it will be built.
Every plywood part is drawn from the laser files and every tube from the design numbers. Switch between the finished rocket and the raw parts, cut it open, pull it apart, and tap anything to see what it is.
View
Look
Show
- Length
- 800 mm
- Diameter
- 57 mm
- Mass with motor
- 581 gEST.
- Stability
- 1.87 calEST.
- Body tubes: matte black paint over primer
- Nose: matte white paint over filler and primer
- Fins: clear satin varnish on bare birch, engraved mark showing
- Raw birch plywood, 3 mm
- Laser-burnt edge
- Bought cardboard tube (colour varies)
Where the shapes come from
Every plywood part is rebuilt from the laser files in n1/out/laser: the same outlines, holes and engraving the S9 Pro cuts. Tubes, the motor and the boards come from the sizes in n1/design.py.
The finish
Finished shows the paint plan in design.FINISH: matte white paint over filler and primer on the nose, matte black paint over primer on the tubes, clear satin varnish on bare birch, engraved mark showing on the fins, and the NOVTAR wordmark, white vinyl decal (22 mm tall) on the booster.
What isn't drawn
Glue fillets and the vents and switch hole in the payload tube aren't modelled yet (the status LED windows are). The LEDs are shown green, as on the pad when all is well. The parachute and shock cord are shown packed in a simple shape; the boards are their real outside sizes.