Skip to content
N-1 · In buildN-1 build book

N-1 Laser files

Every part we cut, ready for the laser.

SVG files in millimetres for 3 mm plywood. Red cuts, black engraves (the Λ mark and part numbers), blue is notes. Open any file to save it. The build book explains the settings and the order to assemble them.

Build book The real cut files

CutEngraveNotesSizes in mm, 1:1

Fit ring (after the tubes arrive)00_fit_ring.svgTest card (cut first)00_test_card.svgFins01_fins.svgMotor mount rings and clips02_motor_mount_rings.svgAvionics bay and sled03_avionics_bay.svgFin jigs and marking ring04_jigs.svgWrap templates (paper)05_wrap_templates.svgDisplay stand06_stand.svgNose cone, sheet A07_nose_cone_A.svgNose cone, sheet B07_nose_cone_B.svgGround station case08_ground_station_case.svg