N-1 TVC Overview
N-1 TVC. Thrust vector control for N-1, vertical hold only.
A second booster for N-1 with a two-axis plywood gimbal that tilts the 29 mm motor up to 5 degrees, moved by two micro servos, to hold the rocket upright during the burn. It is tested on a wooden rig with no motor first, and runs in shadow mode (it works out what it would do and logs it, but moves nothing) until the rig tests are done.

Key numbers
- Gimbal travel
- 5 deg
- Motor
- 29 mm
- Fits tube
- 54 mm inside
- Added mass
- 114 gest.
- Stability
- 1.37 calest.
- Servo torque needed
- 0.44 kgf cmest.
From the design files. est. means worked out before building, not measured.
Pages
N-1 TVC · 01Build bookHow to build it, step by step: shopping list, build, tests and launch day.N-1 TVC · 023D modelEvery part in 3D, built from the real cut files. Turn it, cut it open, pull it apart.N-1 TVC · 03RendersPictures of the rocket and its parts, inside and out.N-1 TVC · 04Laser filesEvery cut file for the laser, ready to save.